ZNG-130-200A-QSG SolarKit-QSG V1_0 WEB.pdf

For help visit incyt by LX incyt.io/support Copyright 2021 LX Corporation Pty Ltd. All rights reserved. Solar Kit Base Station / Power Junction Quick Start Guide

Product Overview Set up the LX Base Station or LX Power 4 Junction according to their Quick Start 1 Solar kit Guide, and connect to the Solar Kit 2 Mounting bracket 3 Pole clamp as pictured on the right. 4 50mm U bolt X 2 5 M6 washer X 6 Installation and Mounting 1 6 M6 spring washer X 6 7 M6 wingnut X 6 5 Select a suitable location to install 2 the Solar Kit. For Base Station installations, note that mounting on a hill or raised 4 structure at least 5 metres away from any objects will significantly increase 5 the range. IMPORTANT! 6 Attach the mounting bracket assembly Base Station 3 6 Antennas must point to the pole as pictured below on the left, 7 and secure U-Bolts with supplied washers towards the ground! and wingnuts.

Preparation This Solar Kit can be used to power an LX Base Station, or a sensor through an LX Power Junction, available for purchase from incyt.io Sun Unpack the contents of the box and check the component list above 1 to ensure the kit is complete. 2 For installation, you will need a set of Charge spanners, a 42-50mm galvanised pole Status LED Error LED to mount the Solar Kit, and any equipment required to securely install the pole. 7 Attach the Solar Kit to the mounting bracket and secure with the 3 Check that the Charge Status LED on the supplied washers and wingnuts as above on the right. Orient the solar Solar Kit is flashing or a solid Green, and panel to maximise sun exposure throughout the day. that the red Error LED is not active. If the Error LED is active, refer to the support Protect cables from animals by purchasing link on the rear of this guide for more information. sheathing from your local hardware store