Quick Start Guide ZNG-130-201A-QSG Gateway Solar Kit V1_0 WEB.pdf

For help visit incyt by LX incyt.io/support Copyright 2021 LX Corporation Pty Ltd. All rights reserved. Solar Kit Antares Gateway Quick Start Guide

Product Overview 5 Peel off the adhesive protective paper on the rear of the Antares device, and 1 Solar kit (Gateway Edition) mount it in the area where it will be 2 Mounting bracket monitoring. Alternatively, it can be 3 Pole clamp 4 50mm U bolt X 2 mounted to the front of the electrical 1 5 M6 washer X 6 box cover on the Solar Kit as pictured 6 M6 spring washer X 6 on the right. 7 M6 wingnut X 6 2 Installation and Mounting 4 6 Attach the mounting bracket assembly to the pole as pictured below on the 5 left, and secure U-Bolts with supplied 3 6 washers and wingnuts. 7

Preparation Sun Unpack the contents of the box and check the component list above 1 to ensure the kit is complete. Ensure you have an LX Antares Gateway device on hand, available for purchase from incyt.io

2 For installation, you will need a set of spanners, a 42-50mm galvanised pole to mount the Solar Kit, and any equipment required to securely install the pole. Check that the Charge Status LED on the 3 Charge Solar Kit is flashing or a solid Green, and Status LED Error LED that the red Error LED is not active. If the 7 Attach the Solar Kit to the mounting bracket and secure with the supplied washers and wingnuts as above on the right. Orient the solar Error LED is active, refer to the support link on the rear of this guide for more information. panel to maximise sun exposure throughout the day. 4 Set up the Antares gateway according Protect cables from animals by purchasing to its Quick Start Guide. Connect the Solar Kit sheathing from your local hardware store power cable to the rear of the device.